192.168.01 router admin login IP is another network address along with 192.168.1.1 used by some wifi routers as their address. These are some of the so-called “private network 16-bit block address locations” that are reserved for use in the private network.
Table of Contents
What is a 192.168 0.1 IP address?
This address space has 65,536 addresses which are typically used for small home networks. Basically, a home or small business network uses only its subsets and most routers reserve the 192.168.1.0 to 192.168.1.255 range for their network.
Steps to Login to 192.168.01 Router
How do I access my 192.16801 router for Administration
Total Time: 3 minutes
Launch you browser
Launch your PC / mobile browser ( Chrome, firefox , safari etc) .
Enter 192.168.01 in url
Once browser is launched enter 192.168.0.1 into your browser’s address bar. Note that you may get error that its not secure. You can ignore as its your local home network. In case of page not found error you may have a different IP of your router. Check your manual to find the right router IP address.
Note the IP 192.168.0.1 is also denoted as 192.168.o.1 or 192 168 01
Enter the wifi password of your router. Generally, the default username will be admin and default password “admin or password”
Manage and Administer your Router
You have your router’s configuration page after successful login. You can go ahead and do the configuration setups here. One of the best practices is to change your password periodically.
Setup an access password
Once you have set up the router make sure to have a password setup for WiFi SSID access. The option should be available under Network Tab. The password should be Complex and should follow the password policies of your router. This password will be used to connect to the network. Once done, save your changes and exit.
Test your Network
You can try connecting to your network via a client, PC / mobile / TV etc using the new password. A successful connection means your configuration using 192.168.01 IP for router login was completed successfully.
Forgot Router Admin Password?
Even if you have forgotten your router admin user and password, you can easily login as the IP address for login to the router console is standard for many brands.. e.g 192.168.0.1 can be used with username admin password “admin” or username admin password “password”. If still you are not able to log in do the following
- Reset your router (Take a pin or ball pen and press the reset button at the back of your router for 15 seconds)
- Check the manual for your router model
- if not call up your customer care.
192.168.0.1 is the default gateway that any device connected to the router would use if they wanted to reach the Internet. You can change this using the ip route command.
> ip route 0.0.0.0 255.255.255 0.0.0 0.0.0 1
The 192.168.0.0/16 subnet
You might have heard about the 192.168.0.0/16 subnet range before. This is a private IP address block reserved for internal network use only. How can you access these addresses?
A router is a device that connects computers together using Ethernet cables or wireless connections. Routers are usually found at home, office, or even at coffee shops. In order to connect devices to the Internet, routers convert data from a computer into packets that can travel over the Internet. The Internet is a global network of interconnected networks that allows people to communicate with each other.
Routers come with default settings that allow them to operate correctly. However, they also support advanced features that allow them to be customized for specific purposes. For example, you can change the default password or modify the DHCP server settings.
How to Configure Your Router in Few Easy Steps
- Check if everything is okay with your internet connection.
- Gather the necessary documentation like user manual, default passwords and username, and the like.
- Last but not least, you should pick up a place for your new 192.168.0.1 router.
- The next important step is to plug your Internet cable in the WAN (wide-area network) port at the back of the device.
- Manufacturers usually make the WAN port in a color different from the other ports so that you can distinguish it easily. You will notice the LED light on your router indicating a connection to the Internet going green.
- Double-check by connecting a laptop to one of the other ports at the back of the router. If you can go on the Internet, everything is going according to plan.
- Some additional settings you might want to check out there include the SSID (Service Set Identifier), or the name of your wireless network, and its password. Set up a strong password so that you enjoy a secure wireless internet experience. You can adjust the private IP address ranges, the port forwarding setting, and the DDNS.
After you’ve completed these steps, you’ll be ready to go.
The easiest way to configure your wireless router is to type 192.168.0.1 in the address bar of your Internet browser. Make sure to type that correctly as some people tend to mistake the address with false ones such as 192.168.ll, 192.168.l.l and similar. Use the default username and password to access the settings page. Most manufacturers provide an installation wizard that will help you get most settings in order.
192.168.0.1 router login console can also be used to configure the WPS settings of the router. Refer to this article to know more about WPS Button on the router.
What is 192.168.0.1 IP?
192.168.0.0/16 is a subnet mask that defines a network range. This means that if your computer’s IP address is 192.168.10.100, then the first 16 bits are set to 0 (or 10000000) and the last 8 bits are set to 1 (or 01000000). In other words, this means that your computer has an IP address between 192.168.10.* and 192.168.11.*.
192.168.10.0/24 is a netmask that defines a single host on a network. If your computer’s IP address was 192.168.10..100, then the first 24 bits would be set to 0 (or 00000000), meaning that your computer’s IP address would be 192.168.10*.
The /24 notation means that the host can have any number of addresses from 192.168.10* to 192.168.10**.
If we take out the leading zeros, we get 192.168.10*/24, which means that our host can have any number from 10* to 10**.
This means that our host can only have 254 hosts.
You can use the following command to check what your current IP address is:
c:\ > Ipconfig
Brands Using 192.168.0.1
There are some Router brands that uses 192.168.0.1 as the router IP address so you should check out the router IP address first as per the above steps by trying to login
There are many router brands that use the IP address 192.168.0.1 as their default gateway, including:
Note that this is not an exhaustive list and other router brands may also use this IP address as their default gateway. Additionally, it’s important to note that while many routers use 192.168.0.1 as their default gateway, some may use different IP addresses, so it’s always best to consult your router’s manual or documentation to determine its default gateway address.
How to find your router’s IP address
If you’re having issues accessing your router at 192.168.0.1 (long loading or not loading at all), your network might be using another address such as 192.168.1.1, 10.0.0.1 or 192.168.2.1. In that case, check our router IP address list.
If you’re unable to find your router’s IP address using this method, you can also try opening the Command Prompt (on Windows) or Terminal (on macOS or Linux) and typing “ipconfig” or “ifconfig” respectively. This should list your computer’s IP address as well as the default gateway, which is usually your router’s IP address.
The common factory passwords for routers using 192.168.0.1 IP are as below unless changed by user.
It can vary depending on the router brand and model. But the most commonly used default login credentials for home routers are:
- Username: admin / Password: admin
- Username: admin / Password: password
- Username: admin / Password: (blank) – leave the password field blank
- Username: admin / Password: 1234
- Username: (blank) / Password: admin
- Username: root / Password: admin
- Username: root / Password: (blank) – leave the password field blank
Please be aware that using the default login credentials can pose a security risk, as it makes it easier for hackers to gain access to your router and network. Therefore, it’s always recommended to change the default login credentials to a unique, strong password as soon as you set up your router.
Login to 192.168.0.1 not working?
If you having trouble fetching 192.168.0.1 router login page then it could be due to one of these issues:
- The wrong IP entered.
- Connection to network not established.
- Try IP’s — 192.168.10.1 or 192.168.0.1. Some routers need a physical wired connection before accessing 192.168.0.1.
- Check if you are on VPN, you may need to disconnect.
- The last option is to do a factory reset.
So if you possess router/ modems of this IP you will need to configure it by logging into its admin settings.
you will need to login via a browser, the URL to navigate is https://192.168.0.1/
For more details of different IP addresses please visit wiki page on IP addresses
The default username and password of many brands is admin/admin
More on home technologies